Reply to thread

Message: [QUOTE="Poon, post: 51727, member: 1007"] I put on new compressor, had it vaced and charged. Now my temps are blowing out at 46. That is a great improvement over what it was. As far as the hot/cold blender door, it is run by a cable , not vacuum. The heater core bypass is working. I pulled the heater core box apart after 30 mins of driving and it was stone cold. I checked the fresh air blender door and it was closed sitting at idle, but I had no way to check it while moving so I zip tied it closed for testing purposes. Like I said, after 30 mins of driving the temps were around 46, But i got home, left the truck running on high idle in the driveway for about 10 mins and when I came out the thermometer said 40 degs. I thought the temps would be lower driving down the road than sitting still. Any idea ? If it will be that cold with no air movement, then I want it that cold driving. [/QUOTE]

Verification

Random media

IMG_20140125_195054_394

IMAG0196

20170502_2125231

IMG_20170126_113104085_HDR

IMG_20170819_224359179

photo_3

b80b6db1

side-1

IMAG1065

6_4Hopper

TheSmokinStroke2002

Latest posts

D
Turning off the Auxiliary powertrain control module
- Latest: donaldtfreeman
- 33 minutes ago
6.0 Tech & FAQ
4r100 P0715/P0717 trouble codes.
- Latest: Tiha
- Today at 8:07 AM
7.3 Tech & FAQ
I must be getting old… Exhaust is too loud
- Latest: ju015dd
- Sunday at 7:59 AM
6.0 Aftermarket
2000 f350 dually lariat
- Latest: Powerstroke Cowboy
- Saturday at 8:30 PM
7.3 Aftermarket
T
B&W hitch and shock removal
- Latest: TexMac
- Wednesday at 2:48 PM
2017+ 6.7 Aluminum Super Duty

Members online

No members online now.

Total: 572 (members: 0, guests: 572)

Top