Reply to thread

Message: [QUOTE="04cr450, post: 1470666, member: 12074"] Basically when your refrigerant pressures are low, you are not getting a full column of liquid going to the orifice before reaching the evaporator coil, ie: no subcooling. You need a full liquid column of refrigerant to create this and have a saturated vapor going to the evaporator coil. Which to make this short drives the refrigerant pressures up esp on the high side. Where your psi's are at now at that high outside temp- there is zero to little subcooling and the system will not efficiently operate Disclaimer: if you add refrigerant and yourn pressures do NOT come up.. you have other issues associated in the system. I can walk you you thru this as well but let's start off with the obove [/QUOTE]

Verification

Random media

Transmission pan

SSBC Brakes

My 2011 F250 Lariat

Smokyred

Dyno at Redline Diesel

IMG_20111106_165959

Misc_041

IMAG0203

Latest posts

Won’t start issues
- Latest: psduser1
- Sunday at 8:30 PM
7.3 Tech & FAQ
Windshield washer fluid reservoir
- Latest: psduser1
- Sunday at 8:27 PM
7.3 Tech & FAQ
F-250 & F-350 gear ratio question ?
- Latest: Mark Kovalsky
- Sunday at 6:57 PM
6.7 Tech & FAQ
Y
2001 Ford F350 7.3 l powerstroke diesel windshield washer fluid reservoir
- Latest: Yojih123
- Sunday at 12:15 PM
7.3 Tech & FAQ
s364.5
- Latest: htsummers22
- Saturday at 10:54 PM
Want to Buy

Members online

Total: 828 (members: 2, guests: 826)

Top