Reply to thread

Message: [QUOTE="superduty4x4, post: 28585, member: 542"] I'm 95% sure you're correct on that one. So doing a little searching I found the Wix 24770 base for $18.64 online. The same place also has the Fuel Manager filter bases, but there are only 5 micron or 30 micron varieties available, though I did manage to scare up a 10 micron filter that will fit the Stanadyne base. How critical is it to have a fuel heater in the pre-filter assembly? I think I'll do it just to be safe since winter temps can get pretty cold up here sometimes, and with the filter down on the frame instead of under the hood where residual heat might last longer the chances of gelling fuel are probably higher. So far with the FM100 5 micron prefilter setup, a 10 micron filter to replace the 5 micron, heater element, and the 24770 post-pump base is $130 with shipping. [/QUOTE]

Verification

Random media

2012-12-03_15-11-49_949

plati3

1995 f350

2011-09-21_18-02-22_887-1

59205_109685675757241_100001474272705_73141_6765346_n

08_xl_front_left

IMG_20110626_1931281

My rig

My 6.0 Powerstroke

Side shot before the lift was installed

The Truck

Latest posts

Hard steer question/issue
- Latest: psduser1
- Yesterday at 8:52 PM
7.3 Tech
B
WTS/WIF light flash and stall issue
- Latest: blickcd
- Yesterday at 6:23 AM
6.0 Tech
T
2013+ steering gearbox in older trucks
- Latest: TPOLO
- Wednesday at 11:09 AM
Suspension, Drive Train, and Tires
J
15 cab on 08
- Latest: jeretl
- Monday at 2:38 AM
Aftermarket Super Duty 1999 - Current
S
F-350 Dually tire size
- Latest: Smokin 6.0
- May 30, 2025
6.7 Tech & FAQ

Members online

No members online now.

Total: 335 (members: 0, guests: 335)

Top