Reply to thread

Message: [QUOTE="6.0 Tech, post: 1381921, member: 23001"] Get a golf tee and start plugging off line. I start with the one going into the pvh solenoid on the passenger fender. I cant remember which line off the top of my head, but trace it from the canister. If that then sends the air out the vents, plug off the line coming out of the solenoid. If it still blows out defrost, put a solenoid on it. If it blows out vents, plug off 1 hub at a time, if neither changes it, find a splice and plug yhere to determine where the leak is. If plugging the inlet to the solenoid doesnt work, plug the line into the tank, see if your pump is leaking, it should shut off after a couple seconds. Also, make sure the pump plug is fully seated on thepump and that the coolant control valve vacuum line is on. [/QUOTE]

Verification

Random media

drill1

gen3

68F7D765-473B-49B2-A342-6E677E43959D

cranking

phone_2017_631

IMG_20161130_080743835

POWER-STRUCK parts

Latest posts

Won’t start
- Latest: psduser1
- Yesterday at 11:33 AM
7.3 Tech & FAQ
GT37 Turbocharger w/10 blade turbine, billet comp.
- Latest: hskfab
- Friday at 1:24 PM
Engine and Drivetrain
Hard steer question/issue
- Latest: psduser1
- Jun 5, 2025
7.3 Tech
B
WTS/WIF light flash and stall issue
- Latest: blickcd
- Jun 5, 2025
6.0 Tech
T
2013+ steering gearbox in older trucks
- Latest: TPOLO
- Jun 4, 2025
Suspension, Drive Train, and Tires

Members online

No members online now.

Total: 185 (members: 0, guests: 185)

Top