Reply to thread

Message: [QUOTE="Vader's Fury, post: 344154, member: 473"] I did this in my 450. I will say that you will need the accessory wire harness from a truck with what you are looking to install. The doors are the same, you only need the hardware to go inside the doors. I added power mirrors, power windows, and power locks to mine. Only thing I had to do besides install the factory wire harness is I added a fuse block behind the dash to power the 3. It was like $8 at napa and just ran a 10 guage power wire to it. Only down side i could see to this is the windows will work even with the truck off and the key out. I like it though as when I forget to roll them up I dont have to turn the key back on. If you have any other or more specific questions, just ask. [/QUOTE]

Random media

2011-11-09_18-18-49_469

6.4 stock & tow power atmosphere

025

1108140831a

20170409_205701

user123603_pic33586_1373077410

Brandon pre-manifold

Truck32

2011-04-22_15-34-16_950

IMG_20150122_121625_584

Latest posts

J
15 cab on 08
- Latest: jeretl
- Today at 2:38 AM
Aftermarket Super Duty 1999 - Current
S
F-350 Dually tire size
- Latest: Smokin 6.0
- Friday at 1:51 PM
6.7 Tech & FAQ
S
F-250 & F-350 gear ratio question ?
- Latest: Smokin 6.0
- Friday at 1:51 PM
6.7 Tech & FAQ
D
‘10 6.4 rebuild
- Latest: Dieselnewb64
- May 22, 2025
6.4 Tech & FAQ
Won’t start issues
- Latest: psduser1
- May 18, 2025
7.3 Tech & FAQ

Members online

SANDPSYCHO

Total: 884 (members: 1, guests: 883)

Top