Reply to thread

Message: [QUOTE="1BADF350, post: 13542, member: 687"] here is a picture looking up first you see the bottom plate then the bag then the top plate. On the Excursion, I welded the 1/4 plate to the frame since this doesnt use a Turnover ball system. [ATTACH=full]60772[/ATTACH] Here is a little closer up of the top plate, I just sheared a piece of 1/4" plate then put a radius cut in the front so it wasnt flat and pointed on the cornners and then bent it on the break 90 degrees. If you have a turn over ball system, you could weld this bracket on the outside frame plates if you want, or you could cut an additional piece of bar stock say 3"x10" and drill 4 bolts through the bar/outside hitch plate/frame I have done it both ways, but drilling through 3 pieces of 1/4" steel 8 times is a PITA..so I welded the bracket on my last hitch plates. Works GREAT!! [ATTACH=full]60773[/ATTACH] Top View-I just drilled a 1" hole for the air fitting and a 7/16" hole for the top bolt. [ATTACH=full]60774[/ATTACH] If you would like any other pic's just let me know. [/QUOTE]

Verification

Random media

Memorial_11_054

Screen_Shot_2013-11-06_at_10_23_29_AM

0806011441

34708F38-232B-490B-9157-249C6BAC2317

SUBURBAN_DRIVER_SIDE

truck31

Zerk_adaptor

Latest posts

10R140 failure
- Latest: Sterling6.7
- Yesterday at 8:54 PM
2017+ 6.7 Aluminum Super Duty
D
Turning off the Auxiliary powertrain control module
- Latest: donaldtfreeman
- Yesterday at 10:43 AM
6.0 Tech & FAQ
4r100 P0715/P0717 trouble codes.
- Latest: Tiha
- Yesterday at 8:07 AM
7.3 Tech & FAQ
I must be getting old… Exhaust is too loud
- Latest: ju015dd
- Sunday at 7:59 AM
6.0 Aftermarket
2000 f350 dually lariat
- Latest: Powerstroke Cowboy
- Saturday at 8:30 PM
7.3 Aftermarket

Members online

No members online now.

Total: 768 (members: 0, guests: 768)

Top