Reply to thread

Message: [QUOTE="FaSSt9602, post: 328954, member: 1872"] Not to hijack, but I have a similar issue that crept up with my AD2. When I installed it I left it at the preset pressure for a while which settled in right at 45. I decided I wanted to bump it up a bit because with the Race X tune it dips to 43 or so, a little on the low side for me. The other night I adjusted the regulator and got it to sit round 58psi. The next morning I started the truck up and the FP was only at about 50. Throughout the day of starting the truck it ranged anywhere from 45-62psi. I have tried to reset the pressure with no luck... My setup is still using the stock pickup tube, with a 1/2" line running to the AD2 unit, with a -8 line running up to a block (gauge port is here) where it splits off to -6 to the heads. So I have taken the stock regulator out of the system already. I called Airdog and talked with Kyle and he told me that the AD2 was not designed to be used without the stock regulator or a RR. I don't know what that has to do with my I get a different pressure rating each time I start the truck... [/QUOTE]

Verification

Random media

Photo_Dec_14_1_31_48_PM

photo-2

SSBC Brakes

IMAG0282_1

DSCN8405

1511MG-304

My 6.0 excursion

919123_367663446688562_990954678_o

472434_368013399986900_30235268_o

New Tires

Latest posts

10R140 failure
- Latest: PSD-BLACK-CLOUD
- Friday at 1:04 PM
2017+ 6.7 Aluminum Super Duty
2010 headunit
- Latest: glog
- Wednesday at 1:17 PM
6.4 Tech
D
Turning off the Auxiliary powertrain control module
- Latest: donaldtfreeman
- Tuesday at 10:43 AM
6.0 Tech & FAQ
4r100 P0715/P0717 trouble codes.
- Latest: Tiha
- Tuesday at 8:07 AM
7.3 Tech & FAQ
I must be getting old… Exhaust is too loud
- Latest: ju015dd
- May 4, 2025
6.0 Aftermarket

Members online

Patrick Feeley

Total: 1,080 (members: 2, guests: 1,078)

Top