Reply to thread

Message: [QUOTE="KBMKVIII, post: 1387249, member: 5718"] ICP sensor is good. Checked it with another sensor and same results. Ohmed the IPR circuit from plug to PCM connector and ohms out correctly. Still can't figure out where I'm getting the voltage back feed. With the relays removed there should be no power to pin 87. But I'm getting 6v on the IDM pin 86. And 6v to pin 87 at the PCM relay. Readings taken with ignition on. With the ignition off only 12v at both pin 30s, which is normal. Kinda lost right now. So far the entire harness has ohmed out correctly. Tapatalking from a wind turbine [/QUOTE]

Verification

Random media

450R2

MPD_Kit

iphone_pics_027

2.5" in front,4" rear. 35x12.5x17's.

IMG_20130426_101656_1061

Stuck_as_F_K

SSBC Brakes

6C7C4C68-7DE8-42F7-95EE-1D559C3877AF

Latest posts

2010 headunit
- Latest: glog
- Wednesday at 1:17 PM
6.4 Tech
10R140 failure
- Latest: Sterling6.7
- Tuesday at 8:54 PM
2017+ 6.7 Aluminum Super Duty
D
Turning off the Auxiliary powertrain control module
- Latest: donaldtfreeman
- Tuesday at 10:43 AM
6.0 Tech & FAQ
4r100 P0715/P0717 trouble codes.
- Latest: Tiha
- Tuesday at 8:07 AM
7.3 Tech & FAQ
I must be getting old… Exhaust is too loud
- Latest: ju015dd
- Sunday at 7:59 AM
6.0 Aftermarket

Members online

projectford

Total: 838 (members: 1, guests: 837)

Top