Reply to thread

Message: [QUOTE="Squat and Poot, post: 1241060, member: 16381"] everythingw as going great until I was tapping wires. I removed fuse as instructed and tapped the green, green/purple, white, and yellow. I have the driver side hooked up and working properly (the green and green/purple wire. Now I'm 99% sure I have the right yellow and the right white wire in the sill and panel to tap into. I buy a test light to test leads of the steps. Check the white and the motor arm retracts. Test yellow and nothing happens. Go back to white and nothing happens. Check fuse and it's good. Driver side still functions but passenger has nothing. I don't think it's the motor because it worked that single time. What should I check? Amp CS isnt open till Monday If you e had similar issues please post up and share what you did to fix it. I'm going to crack a beer and try again. [/QUOTE]

Verification

Random media

bumper_idea_3_

2008 King Ranch motor work

ICPnumbers

Got in a tornado with my new pick up!

374026_3590699413764_681334396_n

2011-11-09_18-15-02_573

2011-11-09_18-19-23_690

Latest posts

10R140 failure
- Latest: PSD-BLACK-CLOUD
- Yesterday at 1:04 PM
2017+ 6.7 Aluminum Super Duty
2010 headunit
- Latest: glog
- Wednesday at 1:17 PM
6.4 Tech
D
Turning off the Auxiliary powertrain control module
- Latest: donaldtfreeman
- Tuesday at 10:43 AM
6.0 Tech & FAQ
4r100 P0715/P0717 trouble codes.
- Latest: Tiha
- Tuesday at 8:07 AM
7.3 Tech & FAQ
I must be getting old… Exhaust is too loud
- Latest: ju015dd
- Sunday at 7:59 AM
6.0 Aftermarket

Members online

No members online now.

Total: 451 (members: 0, guests: 451)

Top