Reply to thread

Message: [QUOTE="DEEZUZ, post: 1520956, member: 1508"] Doing heads on a e series and pull this little guy out. I have seen this a million times, like we all have. But this one was different, well at least in a different stage of failure. I noticed the roller was still in tact but had axial play even with no needles falling out yet. So looks like a oil starvation caused the needles to seize up a few times (which when happened gave the engine a fish bite) and it appears the roller is being wiped by contact in the lifter housing. Thanks to the wear on the pin. Thus wiping the cam lobe. [ATTACH=full]176590[/ATTACH] [ATTACH=full]176591[/ATTACH] [/QUOTE]

Verification

Random media

IMAG0133_1_

20131228_105427

9FE1552F-EBE1-4F61-A890-46504B5A7BF6

eleanor_part_two_35_

IMG_20160415_234719669_HDR

811

32A7B95A-0904-45F9-A359-EAC4998EBEB9

20151030_160615

Dropped on 4800lb. coils and no blocks

896D5EC6-A103-4684-A4BF-9BC2E3D549C0

phone_2017_628

Latest posts

S
4r100 P0715/P0717 trouble codes.
- Latest: smokeybear73
- 40 minutes ago
7.3 Tech & FAQ
I must be getting old… Exhaust is too loud
- Latest: ju015dd
- Yesterday at 7:59 AM
6.0 Aftermarket
2000 f350 dually lariat
- Latest: Powerstroke Cowboy
- Saturday at 8:30 PM
7.3 Aftermarket
T
B&W hitch and shock removal
- Latest: TexMac
- Wednesday at 2:48 PM
2017+ 6.7 Aluminum Super Duty
6
ISSUES WITH CHOATES WARRANTY
- Latest: 6.7powersmoke
- Wednesday at 2:12 PM
1999-2015 Superduty Series General

Members online

Griffin

Total: 535 (members: 1, guests: 534)

Top