Reply to thread

Message: [QUOTE="sootie, post: 1488209, member: 8162"] sounds like a pats issue. First step would be to completely remove the remote start kit. Who cares what it looks like. Next step is to diconnect both batteries and either touch the pos and neg together or hit the brake pedal to use up any residual voltage. let it sit for a bit. Then reconnect the batteries and turn the key to the on position "do not crank". Go to the bullet connector that is tape to the wiring harness on the firewall side of the passenger side battery and separate it. Take the end that heads down towards the starter and touch it to the positive post on the battery. THe truck should crank then and with any luck start. If it starts, it will have reset the pats system. If it doesnt start, you will likely need to reset the pats with IDS. [/QUOTE]

Verification

Random media

IMG_20111106_170011

POWER-STRUCK parts

IMAG0282_1

my truck!

Big_R_Radio_Gospel_Channel

MG_6968

IMG_20140524_212240_644

photo_4_2

Truck14

Do You Know Who I Am.....

Camera_028

Latest posts

Truck slipping into 4th
- Latest: Sterling6.7
- Yesterday at 7:18 PM
6.7 Tech
Do not recommend Choate Engineering
- Latest: DEEZUZ
- Wednesday at 10:22 PM
Newly Enlisted
A few turbo questions and a rant
- Latest: ghohouston
- Wednesday at 9:41 PM
7.3 Aftermarket
O
2011-2016 Radiator upgrade
- Latest: OtisCreekConstruction
- Wednesday at 6:17 PM
6.7 Tech
Performance shops
- Latest: DEEZUZ
- Tuesday at 8:42 AM
7.3 Performance

Members online

Derkperk

Total: 830 (members: 1, guests: 829)

Top