Reply to thread

Message: [QUOTE="DZL JIM, post: 824665, member: 153"] Some info that might help: [URL="http://www.rosewooddieselshop.com/DZLJIM/Ford/tank_vent_mod.htm"][COLOR="Red"]tank vent mod[/COLOR][/URL] The only thing I'd point out is I show the vent at the front filler neck straight out from the neck, which is what you want to do. The rear I show with a 90° elbow and you do NOT want to do this. You need to get the vent tube continuously flowing back to the top of the tank. Any dips in the line and you'll trap fuel and the vent won't work. Use a straight fitting out from the side and route the hose back to the tank as best you can. Yes. I added a F-super Duty valve later on after I put my body lift on. If you put the F-Super Duty vent on with no body lift you'll squish it under the bed. I broke one doing this, soon as I jacked the tank into place the valve shattered against the bed. That's a great valve, nice and big and has roll-over protection, but you really need a flat bed or body lift to use it. [/QUOTE]

Verification

Random media

Fg_800

Camo Feller 3

652_1056686425023_5315_n

429973_3241504444108_2082823257_n

6.4 powestroke fluidampr

20160729_161507

7b21d268

harley2

Truck pics.

initial_key_on

Zmax_6_4

Latest posts

T
B&W hitch and shock removal
- Latest: TexMac
- Wednesday at 2:48 PM
2017+ 6.7 Aluminum Super Duty
6
ISSUES WITH CHOATES WARRANTY
- Latest: 6.7powersmoke
- Wednesday at 2:12 PM
1999-2015 Superduty Series General
Truck slipping into 4th
- Latest: Sterling6.7
- Apr 25, 2025
6.7 Tech
Do not recommend Choate Engineering
- Latest: DEEZUZ
- Apr 23, 2025
Newly Enlisted
A few turbo questions and a rant
- Latest: ghohouston
- Apr 23, 2025
7.3 Aftermarket

Members online

No members online now.

Total: 516 (members: 0, guests: 516)

Top