Reply to thread

Message: [QUOTE="zilla68, post: 1232340, member: 1410"] Here's my issue. I replaced the hpop, ressie o ring, turbo, down pipes, had the exhaust manifolds machined flat, replaced oil rail plugs, banjo bolts, ebpv tube, a bunch of other stuff and replaced the hpop gear cover with one from strictly, has the oring on it. Also, new strictly race obs e fuel, so valley is cleared out. I never had a leak before, but now after driving and it sits, I have an issue. I've looked and looked and its coming from the passenger side for sure, and my bet is its that. I am getting one drop on the ebpv tube nut on the manifold, and its hitting the crossmember and running out the holes there. Least to say its driving my ocd nuts trying to find it. I wonder if that cover is the issue, due to the little tab that holds the wire harness behind the small hose coming off the top of the water pump? the right/drivers side of the new gear cover seems to be dry, but the left side/passenger is the wet side, although I can't tell really. Anyone had any issues with these billet covers? I'm NOT BASHING strictly what so ever, just curious if anyone has used ANY aftermarket cover with any issues. [/QUOTE]

Verification

Random media

1997 ZF5 DRW

Stock TDE1 Timing

ADgerotor1

IMG_0514-1

'07 5.9 Cummins

'07 5.9 Cummins

misc_2013_111

dwmaloney's F450

20200503_155046

1511MG-98

Latest posts

10R140 failure
- Latest: PSD-BLACK-CLOUD
- Yesterday at 1:04 PM
2017+ 6.7 Aluminum Super Duty
2010 headunit
- Latest: glog
- Wednesday at 1:17 PM
6.4 Tech
D
Turning off the Auxiliary powertrain control module
- Latest: donaldtfreeman
- Tuesday at 10:43 AM
6.0 Tech & FAQ
4r100 P0715/P0717 trouble codes.
- Latest: Tiha
- Tuesday at 8:07 AM
7.3 Tech & FAQ
I must be getting old… Exhaust is too loud
- Latest: ju015dd
- Sunday at 7:59 AM
6.0 Aftermarket

Members online

No members online now.

Total: 576 (members: 0, guests: 576)

Top