Reply to thread

Message: [QUOTE="Arisley, post: 1534903, member: 67"] Go to the junkyard and find a truck, you need both ends of the 42 pin connector on the driver side valve cover, cut them with as much wire as you can. Find a wiring diagram that tells you the injector wire locations, or simply trace them back to the connector on your truck. Wire a toggle switch on the wires of your "new" plugs. Wire all the other wires straight through. Unplug the 42 pin connector on your truck and plug your "New" connectors inline. You now have a way to turn each injector off. You can make all of your splices inside a box and mount the switches on the box and label them 1 through 8. That would give you a 7.3L breakout box. [/QUOTE]

Verification

Random media

JD 4020

IMAG1599

intercool

Minotaur Parameters

IMAG1039

08733985

Latest posts

GT37 Turbocharger w/10 blade turbine, billet comp.
- Latest: hskfab
- Yesterday at 1:24 PM
Engine and Drivetrain
Hard steer question/issue
- Latest: psduser1
- Thursday at 8:52 PM
7.3 Tech
B
WTS/WIF light flash and stall issue
- Latest: blickcd
- Thursday at 6:23 AM
6.0 Tech
T
2013+ steering gearbox in older trucks
- Latest: TPOLO
- Wednesday at 11:09 AM
Suspension, Drive Train, and Tires
J
15 cab on 08
- Latest: jeretl
- Monday at 2:38 AM
Aftermarket Super Duty 1999 - Current

Members online

Griffin

Total: 1,304 (members: 1, guests: 1,303)

Top