Reply to thread

Message: [QUOTE="Lethalthreat7.3, post: 1194826, member: 10651"] So you have 3.5ohms at each injector, the same at the 42pin connector but it increases to 7 on each one at the IDM? Is this testing the wiring at the IDM connector? Sure your not testing across two injectors? A single strand of wire can give a good continuity as it isn't carrying a load. The same wire will show a voltage drop(if it carries any at all). Need to understand how/where the test is being performed that increases the resistance in your diagnostics. If you switched injectors and it is still a #2 problem then the problem is in the wire harness somewhere. Make sure you have a really good meter that has a 200ohm scale as you will need this sensitivity to find the problem. Any increase in ohm's(test the leads together first, always) is suspect. I suspect a loose terminal going to the #2inj. Hope this helps [/QUOTE]

Verification

Random media

1997 ZF5 DRW

2011-04-20_14-48-01_917

baja_rack_PIC_

SHAQ

Out with the old, in with the new.

phone_pics_11-24-12_226

5281

Latest posts

Won’t start issues
- Latest: psduser1
- Sunday at 8:30 PM
7.3 Tech & FAQ
Windshield washer fluid reservoir
- Latest: psduser1
- Sunday at 8:27 PM
7.3 Tech & FAQ
F-250 & F-350 gear ratio question ?
- Latest: Mark Kovalsky
- Sunday at 6:57 PM
6.7 Tech & FAQ
Y
2001 Ford F350 7.3 l powerstroke diesel windshield washer fluid reservoir
- Latest: Yojih123
- Sunday at 12:15 PM
7.3 Tech & FAQ
s364.5
- Latest: htsummers22
- Saturday at 10:54 PM
Want to Buy

Members online

No members online now.

Total: 374 (members: 0, guests: 374)

Top