Reply to thread

Message: [QUOTE="psduser1, post: 1489109, member: 735"] Going back and re-reading your original post. You said you are dropping to about 35 psi midrun- roughly 4400 psi? If so, based on 60ish psi at idle, I'm wondering if you shouldn't start with a little higher vis oil? How many passes on The bearings? 60 psi down to 35 psi is a big drop. Assuming of course that those values are based on stable oil temps, and tuning is where you want it. You are assuming that you're not running out of oil in the sump? As I read it, anyway. Just want to clarify details. [/QUOTE]

Verification

Random media

612.8 HP April 2011

No_Limit_CAI_2

20140613_111850

17_1

benintake5

IMG_20160905_185439380_HDR_1_

New "DA" CAC cold tube

98D1B797-4A30-4EAA-8E2C-20F0E8ACB65E

20121111_180409

Complete

platidyno

Latest posts

02 F250 7.3 Will crank, WTS stays on, no start, no OBD
- Latest: Sterling6.7
- Sunday at 8:57 PM
7.3 Tech
P0087
- Latest: DEEZUZ
- Sunday at 11:49 AM
6.4 Tech & FAQ
2015-2019 6.7 HPFP New In Box
- Latest: lincolnlocker
- Jun 1, 2026
Engine and Drivetrain
First 6.0L (56k warning)
- Latest: adrianspeeder
- May 26, 2026
6.0 Tech
Extra external motor oil cooler?
- Latest: justinlogue5_0
- May 26, 2026
7.3 Tech

Members online

rusty1161

Total: 1,169 (members: 1, guests: 1,168)

Top