Reply to thread

Message: [QUOTE="NotThatGuy, post: 1567153, member: 31327"] Please excuse the late reply.... Regarding sensors, I would unplug the IPC before attempting to start the truck and check that the nut on the back of the IPR is tight. If the nut was tight, and unplugging the IPC sensor clears up the idle and smoke issue, then the IPC sensor is probably bad. Regarding injector "o" rings... Does your fuel filter look black after a short interval ? If so the injector "o" rings may be bad, but I doubt that is causing your stalling issues. With only 142,000 miles I would not expect the injectors as a first thought. Unless you have been running your tank dry or the truck has bad fuel pressure. Regards. [/QUOTE]

Verification

Random media

IMG_20150708_132616574_HDR

stevie

2004 F250 with new winch

befor an after

photo1_5_

When the truck was new.

bloody-tampon-costume

625521_10150959063566300_1077575649_n

Latest posts

Truck slipping into 4th
- Latest: Sterling6.7
- Friday at 7:18 PM
6.7 Tech
Do not recommend Choate Engineering
- Latest: DEEZUZ
- Wednesday at 10:22 PM
Newly Enlisted
A few turbo questions and a rant
- Latest: ghohouston
- Wednesday at 9:41 PM
7.3 Aftermarket
O
2011-2016 Radiator upgrade
- Latest: OtisCreekConstruction
- Wednesday at 6:17 PM
6.7 Tech
Performance shops
- Latest: DEEZUZ
- Apr 22, 2025
7.3 Performance

Members online

imelmo

Total: 1,143 (members: 1, guests: 1,142)

Top