Reply to thread

Message: [QUOTE="Foggy6.0Liter, post: 1280319, member: 22897"] Okay guys, so heres some answers to your questions. First off the truck is a late 05 so no throttle plate and no maf sensor, i also have no EGR on the truck, valve is out and blocked off. Im using an electronic pressure sensor to read boost. I did not check the fitting at the time i changed the map hose, i will recheck it but its a stage 2 ported intake and i cleaned and checked all fittings when i installed the intake. I did check the harnesses and connectors for EBP, MAP and VGT, all looked good. As far as fuel pressure i set it at 70 and it never drops below 62-3 at WOT. ICP Voltage peaked at 4.7 so oil system should be in order. At WOT EBP peaked at 38.7 PSI Boost from the Gauge sensor peaked at 19.8 Boost from the Map peaked at 28.7 I have no MAF sensor VGT duty cycle ranges from 15ish% to 80% but my CTS2 doesnt show it in the data log stream so id have to make a pull to check it. I can send any of you guys a copy of the datalog file if you wanna check it out. [/QUOTE]

Verification

Random media

he351ve

0045

IMG_20140101_211310_823

My truck

Gutted interior

My 1997 F-250

Electric fuel

Headstud impact gun

my truck

My '04 6Leaker

no_limit_6_0_kit

Latest posts

9
OEM LED sport headlights
- Latest: 99fordman18
- Yesterday at 8:15 AM
2017+ 6.7 Aluminum Super Duty
10R140 failure
- Latest: PSD-BLACK-CLOUD
- May 9, 2025
2017+ 6.7 Aluminum Super Duty
2010 headunit
- Latest: glog
- May 7, 2025
6.4 Tech
D
Turning off the Auxiliary powertrain control module
- Latest: donaldtfreeman
- May 6, 2025
6.0 Tech & FAQ
4r100 P0715/P0717 trouble codes.
- Latest: Tiha
- May 6, 2025
7.3 Tech & FAQ

Members online

No members online now.

Total: 475 (members: 0, guests: 475)

Top