Reply to thread

Message: [QUOTE="Zeb, post: 1522005, member: 30304"] I’ve used probably a dozen Irate T-4’s, and no one else’s, so I can’t comment on any other brands. I like Irate, but the oil drain can be a bit of a pain to line up. That 450 was the last one I installed, and it took me 2hrs 15 minutes from when I pulled the truck into the shop with the stock turbo till I backed it out with the T-4 and 362 on it. What everyone calls the 362 is actually a 361.5. I would definitely run the .83 turbine housing over the .91 with your injectors. I run the 68mm turbine and .83 housing all the way up to a 64.5 and 205/30’s on stuff that’s daily driven. 362/68 supercore part number is 13009097056 .83 turbine housing part number is 178313. This setup will work with your stock intercooler boot, intercooler pipe, and intake. I’ve wrestled with a few aftermarket downpipes, but the flange and factory clamp will connect to the turbine outlet with no modifications. [/QUOTE]

Verification

Random media

Kazakhstan

road trip (pit stop)

John Deere 110 vs X728

Camo Feller 1

elite_ccv1

Headlights

DE_4_Side

Latest posts

Truck slipping into 4th
- Latest: Sterling6.7
- 44 minutes ago
6.7 Tech
Do not recommend Choate Engineering
- Latest: DEEZUZ
- Wednesday at 10:22 PM
Newly Enlisted
A few turbo questions and a rant
- Latest: ghohouston
- Wednesday at 9:41 PM
7.3 Aftermarket
O
2011-2016 Radiator upgrade
- Latest: OtisCreekConstruction
- Wednesday at 6:17 PM
6.7 Tech
Performance shops
- Latest: DEEZUZ
- Tuesday at 8:42 AM
7.3 Performance

Members online

1320goat

Total: 764 (members: 2, guests: 762)

Top