Reply to thread

Message: [QUOTE="JrStroker, post: 972908, member: 10822"] Truck is an 08 Job 2 F250 Spartan, full exhaust, intake, egr delete, studs, 6 inch lift on 37s So a couple weeks ago I was driving home and my power brakes and power steering went out. The pedal would engage brakes but wouldn't return to normal position after I let off. I had to pull it up with my foot. On the way home my power steering pump started making a awful noise. So far I replaced the power steering pump and put it together. Still no power brakes or power steering. Got a P0703 code, input circuit B, and did a little searching and figured out it was the front most sensor in the master cylinder was bad. So I replaced that, and the power steering is back and so is the power brakes, but the brake pedal still won't come back on its own. So now, the pedal is really hard when first pushed on then goes soft and goes to the floor. The brakes stay on and truck won't move until I pull the pedal up with my foot. Also can hear a bit of a hissing noise under the dash, like fluid flowing threw a restricted hose. Still getting the P0703 code and also getting a trailer brake module fault on the dash screen. Anyone have any info that could possibly help me? Thanks guys. Cory Anderson [/QUOTE]

Verification

Random media

The Truck

O&G's 2011 F250 Journey

rock sheild I made to protect the air filter

IMAG0030

eleanor_part_two_12_

A02437BE-98EE-46D1-8489-7BD09C0B10BD

Picture_058

eleanor_part_two_9_

Layout

Latest posts

Truck slipping into 4th
- Latest: Sterling6.7
- Friday at 7:18 PM
6.7 Tech
Do not recommend Choate Engineering
- Latest: DEEZUZ
- Wednesday at 10:22 PM
Newly Enlisted
A few turbo questions and a rant
- Latest: ghohouston
- Wednesday at 9:41 PM
7.3 Aftermarket
O
2011-2016 Radiator upgrade
- Latest: OtisCreekConstruction
- Wednesday at 6:17 PM
6.7 Tech
Performance shops
- Latest: DEEZUZ
- Apr 22, 2025
7.3 Performance

Members online

No members online now.

Total: 424 (members: 0, guests: 424)

Top