Reply to thread

Message: [QUOTE="Cppr Busa, post: 1040815, member: 371"] My 2002 7.3 has been having a problem with the brakes sticking on me. I drive for about 10 minutes and the brakes are cool and work fine. Then after about 15-20 minutes of driving the brakes start holding pressure until the point of smoke rolling off the brakes if I drive it long enough. The things I have done so far is replace all 4 calipers, rotors and brake pads. I also swapped all the rubber lines to stainless steel braided lines. I have taken the calipers off each wheel lubed the pins and made sure the pads slip in and out nice. I can pull the truck in the shop jack it up put it in neutral the wheels are locked up solid and won't move. If I crack a bleeder open everything spins free like it should. I tried it over again this time cracking the lines at the master cylinder and the pressure stayed applied.(then I cracked the bleeder on the caliper and it spun free again) So I'm guessing it's before the master cylinder and hydro booster. Anyone have and experiences, ideas or guesses what I should look at next? Thanks for any and all help! [/QUOTE]

Verification

Random media

The rear

Picture_096

my 06-6.0

2011-11-09_18-18-13_883

Wreck4

efi_vs_dd

Magneto_side_shop

7D68CB75-0F2F-42FA-B435-909EEFC06FB1

Latest posts

10R140 failure
- Latest: PSD-BLACK-CLOUD
- Yesterday at 1:04 PM
2017+ 6.7 Aluminum Super Duty
2010 headunit
- Latest: glog
- Wednesday at 1:17 PM
6.4 Tech
D
Turning off the Auxiliary powertrain control module
- Latest: donaldtfreeman
- Tuesday at 10:43 AM
6.0 Tech & FAQ
4r100 P0715/P0717 trouble codes.
- Latest: Tiha
- Tuesday at 8:07 AM
7.3 Tech & FAQ
I must be getting old… Exhaust is too loud
- Latest: ju015dd
- Sunday at 7:59 AM
6.0 Aftermarket

Members online

Jonnydime

Total: 696 (members: 1, guests: 695)

Top