Reply to thread

Message: [QUOTE="powerstroked08, post: 1419439, member: 8135"] Stock rods are good to that power level. And you gotta remember that it's not the hp that bends them. It's the torque. And being that your going to a single your going to drop some low end torque which is going to help the rods. Now with your build that's a nice list bit you really don't need the fly cut pistons. Stick to the maxx force pistons coated. With the fly cut pistons it can haze at idle sometimes and it's not needed on your build unless your running a pile of rpms or a big cam. And you would probably have better luck with a fuelab low pressure setup for reliability. The air dog and fass have had their share of troubles. And your more than likely going to drop rail pressure with the 30's. I mean a few and I mean a very few have maintained rail with a single pump and 30's. [/QUOTE]

Verification

Random media

Wiring diahgrams

25634_1295950922276_1335447039_30951808_1247213_n

2012-10-13_21-33-46_53

Quacker_State

Wash Run

2011

IMAG0210

Big_Red

Hydroboost and power steering

Latest posts

T
B&W hitch and shock removal
- Latest: TexMac
- Today at 2:48 PM
2017+ 6.7 Aluminum Super Duty
6
ISSUES WITH CHOATES WARRANTY
- Latest: 6.7powersmoke
- Today at 2:12 PM
1999-2015 Superduty Series General
Truck slipping into 4th
- Latest: Sterling6.7
- Friday at 7:18 PM
6.7 Tech
Do not recommend Choate Engineering
- Latest: DEEZUZ
- Apr 23, 2025
Newly Enlisted
A few turbo questions and a rant
- Latest: ghohouston
- Apr 23, 2025
7.3 Aftermarket

Members online

DEEZUZ

Total: 1,128 (members: 1, guests: 1,127)

Top