Reply to thread

Message: [QUOTE="Breaking Habits, post: 898503, member: 5046"] This has been an ongoing project for the last 6 months, but things are finally starting to get to the point where I'd throw up a build thread.. pictures will come in the next couple days Truck started out as a bone stock 2013 F350 Platinum White Shortbox with Pecan Interior. Immediately put it on the lift, truck got a Mini Maxx Race Programmer, along with an AFE Delete Pipe, and Magnaflow Dual Black Same Side Exit Exhaust. I 86'ed the Stock Suspension in favor of an Icon Stage 3 3.5" Kit w/ Piggybacks, and substituted OUO Traction Blocks in the rear. Truck runs 5" 5* Tapered Traction blocks, with Long Gusset Bars, and OUO ALA's up front. I also opted for an OUO Rear Axle Truss in the rear, along with the Front Truss with Fabricated Differential Cover and Dual OUO Front Stabilizers. The truck is also rocking 22x10 American Force Delta's w/ 35x12.50/22 Toyo Open Country MT's This truck drives pretty awesome like this, but I want more.. We tore the truck down in July to be the Guinea Pig for the RCD-6.7 T4TMK with all stainless components. This kit is a piece of stainless artwork for sure. We originally planned on doing a Borg Warner 64/71 3rd Gen Box Charger.. But I cant do anything basic.. The truck is now getting a Precision Dual Ball Bearing 64/66/T4 .81 Divided Housing Charger, so that thing should make some sweet sweet music. After speaking with quite a few people running charger, it should snap your neck spooling wise and make decent power. I want response, I really could care less if the truck makes gobs of power, but it's gotta be something my old man can get in and drive and not be irritated with in traffic Pulling the cab tomorrow to swap the charger and finish the build, this would have been done about 3 months ago, but the guy at our fabrication shop who was working on the turbo kit got injured and has been out for almost 3 months. He's back to work and my coolant tube should be done to get this truck ready to go! The cab is coming off for R&R RCD Connecting Rods, A1 Technologies Head Studs, Precision 6466, and Elite Diesel Zmaxx Intake Manifold/Valve Covers. I'm also going to be installing one of the first Elite Diesel Dual Pump Kits from Tadd if it gets here in time, and running a Fass feeding that pump. I'm also going to be installing a new style of shocks by One Up Offroad we will be offering more down the road. They are a satin chrome finish reservoir, Ill post some pictures of those as well Sean & Tyler @ Street Diesel Performance hooked me up on a custom set of 22x12" AF Raptors with 35x12.50 Toyo MTs, very excited to see them on the truck.. Ill post pictures as the truck comes apart and of some of the progress so far. Thanks Jared [/QUOTE]