Reply to thread

Message: [QUOTE="Dieselboy., post: 570225, member: 1232"] Not much to a write up, but here are some pics [img]http://imageshack.us/a/img585/705/pcs8.png[/img] Here are the different clock springs. The black one is the stock XL one. [img]http://imageshack.us/a/img341/9075/pcs1.png[/img] This is the plugs under the dash, you can see the 4 wires pulled for the digital inputs and common [img]http://imageshack.us/a/img29/3291/pcs7.png[/img] Another angle of the 4 pins, Arm, Upshift, Downshift, Common [img]http://imageshack.us/a/img820/1646/pcs2.png[/img] This is the end of the wiring harness from the clock spring that I connected my Digital inputs to. [img]http://imageshack.us/a/img62/9533/pcs3g.png[/img] This is where I ran the wires into the cab for all my PCS stuff [img]http://imageshack.us/a/img7/7868/pcs4d.png[/img] 4 Digital inputs ran from the PCS into the cab [img]http://imageshack.us/a/img803/970/pcs6.png[/img] Just before putting the airbag on, Dave modified this. Im guessing he connected it so the resumer button sends power to the on/off. Ill let him fill us in. [img]http://imageshack.us/a/img94/3237/pcs5.png[/img] Finished [img]http://imageshack.us/a/img267/9126/digitalin.png[/img] This is a screenshot of my Digital input screen and how its setup via programming. It correlates which input to what button, active hi or low for power and a reverse logic. Pretty strait foward, as PCS has taken the guess work out of it. Basically was as simple as swapping wheels and hooking up wires. Dave did modify the steering wheel as you can see in one pic. I had to hunt for a proper clockspring as the 99-01 are different from the 02 and up. The new one is from an 05. The hardest part was getting the old wheel off. [/QUOTE]