Reply to thread

Message: [QUOTE="Breaking Habits, post: 780787, member: 5046"] If its any reassurance.. I've been running a stage 1 colt cam for 3 years, longer than anyone else on here, and have not bent a valve yet. For what it's worth; we've seen many, many trucks with stock cams have piston to valve contact, and many with stage 1s have piston to valve contact Wanna make it simple, fly cut your pistons no matter what you do I tell every customer that, because your first free rev @ 5000, chances are, if tolerances are even slightly off (head machining without recession of valve) or slight decking, you will probably have contact. It's cheap reassurance, and my biggest selling/living point, PREVENTATIVE MAINTENANCE. Why not do it if your there, because chances are you'll need it down the road. If you can afford to so it right the first time; always, because half ass ends up costing both pockets worth! Stage 2 cam, pistons with a little bowl work and fly cuts, just like Tyler is doing. It's a recipe for perfection. Jared [/QUOTE]

Verification

Random media

176

67ic2

Turkey_Run_039

phone_2017_218

old trucks

White truck

Screenshot1

photo3_zpsdec9636b

Latest posts

10R140 failure
- Latest: Sterling6.7
- Yesterday at 8:54 PM
2017+ 6.7 Aluminum Super Duty
D
Turning off the Auxiliary powertrain control module
- Latest: donaldtfreeman
- Yesterday at 10:43 AM
6.0 Tech & FAQ
4r100 P0715/P0717 trouble codes.
- Latest: Tiha
- Yesterday at 8:07 AM
7.3 Tech & FAQ
I must be getting old… Exhaust is too loud
- Latest: ju015dd
- Sunday at 7:59 AM
6.0 Aftermarket
2000 f350 dually lariat
- Latest: Powerstroke Cowboy
- Saturday at 8:30 PM
7.3 Aftermarket

Members online

No members online now.

Total: 737 (members: 0, guests: 737)

Top