Reply to thread

Message: [QUOTE="501 96 7.3, post: 1534494, member: 19125"] Magnum, the hp oil could be a problem I guess but I will have to get it back together and go for a drive to monitor oil pressure. And as you said already that would throw a code.? gohouston, I assume since it has 60-65 psi fuel that would rule fuel out as a problem. My truck sputters, runs rough at idle and through the entire rpm range. I do have a regulated return with Efuel. I burnt one pump up because of low fuel years ago but my pressure dropped before it died. I was actually watching fuel pressure mostly on the last drive. I did another continuity check across all the injector solenoids back to the 42 pin connector and they ranged from 3.2-3.4 ohms. I am open to ideas if anybody has any more, and again thanks for the replies. [/QUOTE]

Random media

20200209_165846

0291

Kazakhstan

vgt turbo functions

jeep_front

20140828_123726

stock_wheels_sale_2

realtruck2

0208151604a

Dropped on 4800lb. coils and no blocks

Latest posts

10R140 failure
- Latest: PSD-BLACK-CLOUD
- Friday at 1:04 PM
2017+ 6.7 Aluminum Super Duty
2010 headunit
- Latest: glog
- Wednesday at 1:17 PM
6.4 Tech
D
Turning off the Auxiliary powertrain control module
- Latest: donaldtfreeman
- May 6, 2025
6.0 Tech & FAQ
4r100 P0715/P0717 trouble codes.
- Latest: Tiha
- May 6, 2025
7.3 Tech & FAQ
I must be getting old… Exhaust is too loud
- Latest: ju015dd
- May 4, 2025
6.0 Aftermarket

Members online

No members online now.

Total: 625 (members: 2, guests: 623)

Top