Reply to thread

Message: [QUOTE="devdiesel, post: 1190877, member: 5653"] after a good amount of bodywork we were finally able to wrap it all, Turned out exactly how i hoped. nice to finally see it all put together and looking proper with the bed mounted we moved on to other things, got the stack hole re- cut (for track use), got the bottle mounted and feed line run, and got the trans cooler mounted on the side of the inner bed. we cut a square out of the side of the bed behind the cooler so there will be lots of airflow available while keeping it tucked away. got the nitrous controller mounted up and wired, made a solenoid bracket and got a couple bungs welded on the intercooler pipe and buttoned everything up still need to plumb the trans cooler in, clean up the holes in the bed and a few other little things [/QUOTE]

Verification

Random media

22CFE362-8FC2-4A49-B36A-F2F44645DDFE

Arco Idaho

6_7_Ford_exploded_glow_plug_view

trips_completed

iphone_pics_238

efi_intake2

575

new_badge

110

578

Latest posts

10R140 failure
- Latest: PSD-BLACK-CLOUD
- Friday at 1:04 PM
2017+ 6.7 Aluminum Super Duty
2010 headunit
- Latest: glog
- Wednesday at 1:17 PM
6.4 Tech
D
Turning off the Auxiliary powertrain control module
- Latest: donaldtfreeman
- May 6, 2025
6.0 Tech & FAQ
4r100 P0715/P0717 trouble codes.
- Latest: Tiha
- May 6, 2025
7.3 Tech & FAQ
I must be getting old… Exhaust is too loud
- Latest: ju015dd
- May 4, 2025
6.0 Aftermarket

Members online

BrianBen

Total: 635 (members: 1, guests: 634)

Top