Reply to thread

Message: [QUOTE="slowcoupe, post: 1341915, member: 5146"] Yea the thermostat housing is kind of a pain to get off. The most forward fuel line needs to be undone to get a socket onto the rear of the 2 1/2" bolts(if I remember correctly that is their size). I was able to remove mine without taking out the air box or intercooler pipe on the driver side. DO NOT remove the oring gasket from the housing. Doing so will cause it to stretch terribly and it will not insert properly going back in and will leak from there when up to temp. Once you get the thermo/housing out your going to depress the thermostat spring and pry/slide the bottom portion out of the slots on the actual housing. It looks at first as it is one solid unit but they do come apart. Once that is removed you can reinstall the housing to the block. [/QUOTE]

Verification

Random media

20170502_212501

2011-04-20_14-50-12_111

thumb_IMG_1330_1024

Camera_014

new_turbo_006

photo_7

20121013_120023

6_7_CAI_2_

TheSmokinStroke2002

Hydroboost and power steering

sept_29_10_171

Latest posts

6.4 head gasket job cost
- Latest: DEEZUZ
- 17 minutes ago
6.4 Aftermarket
2018 f350 dually advance trac and hill descent unavailable ?
- Latest: 6.0 Tech
- Today at 8:20 PM
6.7 Tech & FAQ
T
6.4
- Latest: Tkb6.7
- Yesterday at 11:19 PM
Newly Enlisted
S
6R140 surging issue
- Latest: Smokin 6.0
- Wednesday at 6:40 PM
6.7 Tech & FAQ
B
PMF Traction Bars - Fixed vs Floating
- Latest: Benson1025
- Wednesday at 11:34 AM
Suspension, Drive Train, and Tires

Members online

DEEZUZ

Total: 565 (members: 1, guests: 564)

Top