Reply to thread

Message: [QUOTE="gnxtc2, post: 1425698, member: 1414"] The traction bar mounts are approximately 1/4" away from the frame brackets for the body mounts. They are around the middle of both doors. I run a Titan Tank and wanted clearance. Here is a pic of the passenger side. I had to relocate the hole for the hose/line (whatever it) strap onto the bracket. I also swapped out the Grade 5 zinc bolts for Grade 8 zinc chromate bolts so they all match. [ATTACH=full]168917[/ATTACH] You can barely see the bars. [ATTACH=full]168918[/ATTACH] Also, get yourself a set of center punches to mark the holes. If you can get yourself a mag drill, it'll help a lot. [img]http://www.flexbar.com/shop/pc/catalog/330-econo-pic_Page_1_Image_0003.jpg[/img] If you need more pics, let me know. Billy T. [email]gnxtc2@aol.com[/email] [/QUOTE]

Random media

drive_side

IMAG0046

20170808_225337

my truck

Window switch comtrols

2012-03-13_12_35_091

diamond eye exhaust 5

20150413_192754

Capone truck short bed

Latest posts

J
15 cab on 08
- Latest: jeretl
- Yesterday at 2:38 AM
Aftermarket Super Duty 1999 - Current
S
F-350 Dually tire size
- Latest: Smokin 6.0
- Friday at 1:51 PM
6.7 Tech & FAQ
S
F-250 & F-350 gear ratio question ?
- Latest: Smokin 6.0
- Friday at 1:51 PM
6.7 Tech & FAQ
D
‘10 6.4 rebuild
- Latest: Dieselnewb64
- May 22, 2025
6.4 Tech & FAQ
Won’t start issues
- Latest: psduser1
- May 18, 2025
7.3 Tech & FAQ

Members online

Powerstroke Racer

Total: 1,615 (members: 1, guests: 1,614)

Top