Reply to thread

Message: [QUOTE="superpsd, post: 1473473, member: 15821"] I removed the fuel bowl and added a spin on filter that is bolted to the fender. To do this you need an aftermarket adjustable regulator. You need the filter mount napa/wix, some hose, clamps, regulator with orb to JIC fittings to connect return hoses to regulator and to return, liquid filled gauge to set and monitor pressure. And that's it. Most expensive part is the regulator. The filter base will bolt to the fender near the master cylinder with pre existing holes if you use the basic napa wix base. Cleans up the valley and makes access to the hpop and IPR a breeze. [/QUOTE]

Verification

Random media

2010

IMAG0533

IMG_20111001_135317

2011-05-27_11-32-15_272

New Tires 2

tshirt

IMG_20140510_185714_613

motor3

CCV_Delete

Latest posts

2010 headunit
- Latest: glog
- Today at 1:17 PM
6.4 Tech
10R140 failure
- Latest: Sterling6.7
- Yesterday at 8:54 PM
2017+ 6.7 Aluminum Super Duty
D
Turning off the Auxiliary powertrain control module
- Latest: donaldtfreeman
- Yesterday at 10:43 AM
6.0 Tech & FAQ
4r100 P0715/P0717 trouble codes.
- Latest: Tiha
- Yesterday at 8:07 AM
7.3 Tech & FAQ
I must be getting old… Exhaust is too loud
- Latest: ju015dd
- Sunday at 7:59 AM
6.0 Aftermarket

Members online

Powerstroke Cowboy

Total: 273 (members: 1, guests: 272)

Top