Reply to thread

Message: [QUOTE="FX44AU, post: 1290525, member: 22740"] The kit will come with a relay harness to use so you don't have to cut any wiring..... you need it anyways. The high beam solenoid is attached to the projector body and moves the shield up and down. It has a pigtail that plugs into a wire labeled "high beam" on the relay harness. When you install the relay harness it pulls the low/high signal off of the factory plug so there is no splicing involved. Hope that clears it up some. Not sure why they turned off before when switching to highs. As long as your highs/lows work properly now you shouldn't have any issues because all it'll do is drop the shield down out of the way. [/QUOTE]

Verification

Random media

befor an after

Hit_and_Run_8-1-2012

Always changing to make it a home on the road.

11-8-2014

1_imagejpeg_2

20140114_135303

20151111_135114

6_7_lowered

exit_3

5362B81D-69BA-4093-903D-726FA0910C54

Latest posts

10R140 failure
- Latest: PSD-BLACK-CLOUD
- Yesterday at 1:04 PM
2017+ 6.7 Aluminum Super Duty
2010 headunit
- Latest: glog
- Wednesday at 1:17 PM
6.4 Tech
D
Turning off the Auxiliary powertrain control module
- Latest: donaldtfreeman
- Tuesday at 10:43 AM
6.0 Tech & FAQ
4r100 P0715/P0717 trouble codes.
- Latest: Tiha
- Tuesday at 8:07 AM
7.3 Tech & FAQ
I must be getting old… Exhaust is too loud
- Latest: ju015dd
- Sunday at 7:59 AM
6.0 Aftermarket

Members online

No members online now.

Total: 761 (members: 1, guests: 760)

Top