Reply to thread

Message: [QUOTE="strokin6L, post: 1062340, member: 842"] Little update. I swapped #3 injector with #1. Started the truck with valve cover off. Rocker arms and push rods looked to be moving the same as the rest. Didn't notice anything out of the ordinary with the pushrods or rocker arms. Valve springs all seemed to look good also. After startup I started to get a contribution/balance code for #6. I erased it and it came back like 5-6 times just idling in the driveway. It threw nothing for #3 or #1 after he swap....was completely baffled. So I let it sit for a couple hours and restart. Now I stopped getting codes for #6 and consistently get balance code for #3 again. I'm at a real loss why #6 started acting up. I decided to pull the hpo rail and swap it out with the one off my spare engine. I'm hoping maybe the rail is messed up somehow or the knuckle on the rail where it sits on the injector. Gonna finish it tomorrow and see. [/QUOTE]

Verification

Random media

Frosty 6.7

2011-04-12_17-35-23_328

0031

Beeeeeeeer

11-8-2014

97psd6

5C3T-18C815-CB RADIO

08 door handles

O&G's 2011 F250 Journey

Grab pillars

Latest posts

Truck slipping into 4th
- Latest: Sterling6.7
- Friday at 7:18 PM
6.7 Tech
Do not recommend Choate Engineering
- Latest: DEEZUZ
- Wednesday at 10:22 PM
Newly Enlisted
A few turbo questions and a rant
- Latest: ghohouston
- Wednesday at 9:41 PM
7.3 Aftermarket
O
2011-2016 Radiator upgrade
- Latest: OtisCreekConstruction
- Wednesday at 6:17 PM
6.7 Tech
Performance shops
- Latest: DEEZUZ
- Apr 22, 2025
7.3 Performance

Members online

No members online now.

Total: 781 (members: 0, guests: 781)

Top