Reply to thread

Message: [QUOTE="Wojo, post: 1339994, member: 3606"] So my father in law bought a 2003 F450. Truck has problems and was throwing contribution codes for #3 and #5. Needed the turbo rebuilt. And needed a new ficm. He bought the truck and I promptly proceeded to throw 4 new injectors in #1,3,5,7 and a new ficm from Bulletproof Diesel. Rebuilt the turbo with a garret rebuild kit and threw it all back together. Cleared the codes and went for a drive. Ran good but had a slight spitting at high rpm when really in it. Never threw a code.I figured it was air in the oil still as I only put about 10 miles on it. Truck now has 200 miles or so since work has been done and is now throwing contribution codes for #1 and #7 which I just replaced. No other codes present. Still runs exactly as it did with a slight spitting/miss at high rpm. HPOP pressure is good. I pulled the injector harness out and see nothing visibly wrong with it. Any clue as to what may be the problem? Things to check? I may just replace the harness to rule it out but am unsure yet. Any help would be great! [/QUOTE]

Verification

Random media

Buster the wayward Boxer :)

truck43

White truck

jeep_side_updated1

390331_211912865568083_100002481131528_446615_649574754_n

2012-01-14_15-32-48_221

6.7 Ford w/MPD pedestal

Interior

intercool

drag_wheels_mounted

Doin It Daily Style...

Latest posts

2010 headunit
- Latest: glog
- Yesterday at 1:17 PM
6.4 Tech
10R140 failure
- Latest: Sterling6.7
- Tuesday at 8:54 PM
2017+ 6.7 Aluminum Super Duty
D
Turning off the Auxiliary powertrain control module
- Latest: donaldtfreeman
- Tuesday at 10:43 AM
6.0 Tech & FAQ
4r100 P0715/P0717 trouble codes.
- Latest: Tiha
- Tuesday at 8:07 AM
7.3 Tech & FAQ
I must be getting old… Exhaust is too loud
- Latest: ju015dd
- Sunday at 7:59 AM
6.0 Aftermarket

Members online

No members online now.

Total: 745 (members: 0, guests: 745)

Top