Reply to thread

Message: [QUOTE="Blowby, post: 184536, member: 711"] Needed something to work on this winter so I started on the removal of the mechanical regulators for my waste gates and on to electronic. Created the mount and snap in holders on the 3D printer to allow me to make changes on the fly. The snap in holders are press fit into location holes on the mount. I wanted to eliminate printing the features that have been proven and only print the areas that need additional iterations. The mount will be changed as I start to finalize the location. [ATTACH=full]74027[/ATTACH] The two 1/8 NPT female fittings will hold the MAP sensors for each WG. HP and LP will be controlled independently. [ATTACH=full]74028[/ATTACH] The two male fittings on the back will be seeing regulated high pressure from either my Nitrous bottle or CO2 on one fitting and the other fitting will provide pressure to a line leading to the fitting under the diaphragm of the HP WG. This will hold down the diaphragm using the solenoids per controller. I will keep it next to the WG's on the passengers side by the AC unit. More pictures to come as this progresses. [/QUOTE]

Verification

Random media

new_wheels

eleanor_part_two_50_

step_13

20150911_160913

16348E9E-3122-44E3-BB24-B6E4EAEF2F51

573

1st_gear_converter_lock

2011-06-24_13-31-45_718

IMG_20110715_180532

Latest posts

Truck slipping into 4th
- Latest: Sterling6.7
- Friday at 7:18 PM
6.7 Tech
Do not recommend Choate Engineering
- Latest: DEEZUZ
- Apr 23, 2025
Newly Enlisted
A few turbo questions and a rant
- Latest: ghohouston
- Apr 23, 2025
7.3 Aftermarket
O
2011-2016 Radiator upgrade
- Latest: OtisCreekConstruction
- Apr 23, 2025
6.7 Tech
Performance shops
- Latest: DEEZUZ
- Apr 22, 2025
7.3 Performance

Members online

Total: 828 (members: 3, guests: 825)

Top