Reply to thread

Message: [QUOTE="Ipkyss, post: 1124355, member: 1737"] Trying to help a friend with his truck. 08 job 2-3 100k miles bone stock. Lost an injector and drove the last few miles back to his shop. His shop mechanic put 8 rebuilt injectors into it and now it is running very bad. Shows misfire cyl 2. Blow by does not seem nearly bad enough to be a bad piston. It sounds like there is a compression leak under the driver side valve cover. Curious if maybe the injector is not seated properly? oil is a little high which I assume is from the bad injector. coolant looks good. I plan to check compression tomorrow. I will also have a snap on solus pro to use, but I have not used one and not positive what to check for. Just trying to figure out as much as possible before I start pulling things apart. I was hoping it would be a mistake from the person that swapped the injectors. [/QUOTE]

Verification

Random media

No Limit

eleanor_part_two_12_

10724039_1567190890168874_728821699_n

IMG_20130406_180211_348

FB_IMG_1524919656191

2013-01-06_17-12-06_538

OUO 525

Doin It Daily Style...

OBS Fleet

2012-03-27_15-10-59_934

6_0_intake_hydro_dipped

Latest posts

OEM LED sport headlights
- Latest: KBMKVIII
- Today at 9:11 AM
2017+ 6.7 Aluminum Super Duty
10R140 failure
- Latest: PSD-BLACK-CLOUD
- Friday at 1:04 PM
2017+ 6.7 Aluminum Super Duty
2010 headunit
- Latest: glog
- May 7, 2025
6.4 Tech
D
Turning off the Auxiliary powertrain control module
- Latest: donaldtfreeman
- May 6, 2025
6.0 Tech & FAQ
4r100 P0715/P0717 trouble codes.
- Latest: Tiha
- May 6, 2025
7.3 Tech & FAQ

Members online

No members online now.

Total: 697 (members: 0, guests: 697)

Top