Reply to thread

Message: [QUOTE="JohnT24, post: 972424, member: 11219"] :bs: First of all, To remove the bezel.... #1 with a small screw driver, pop off the 2 long inserts on the dash ... there are screws under them. THEN and only then can you start pulling back on the bezel. #2 To remove the headlight knob, you need to sneak behind the loosened bezel and remove the 2 screws holding the headlight control... once it is loose, there is a push button on top of the control... push it and the shaft pulls out of the control. (this is how most headlight switches have worked since the beginning of time.) If you just simply "pull hard on it" like someone else suggested ... YOU WILL BREAK IT. #3 Go real easy with the tank control switch... the bosses that hold the screws are not that deep and will break if you manhandle it. #4 Obviously lots of people have had the dash off before to replace bulbs... I don't know whats so hard about giving proper directions to remove the dash. If you just start yanking on it, you are gonna have a pile of broken plastic parts. #5 :blah::blah::blah::blah::blah::blah::blah::blah::blah::blah::blah::blah::biggun: [/QUOTE]

Verification

Random media

IMG_20121128_082956

untitled103

phone_2017_581

2008 6.4L pic6

front2

1997 ZF5 DRW

My new platinum all stock besides that cop tint

Bullet proof diesel oil cooler kit install

1997 ZF5 DRW

Latest posts

10R140 failure
- Latest: PSD-BLACK-CLOUD
- Friday at 1:04 PM
2017+ 6.7 Aluminum Super Duty
2010 headunit
- Latest: glog
- Wednesday at 1:17 PM
6.4 Tech
D
Turning off the Auxiliary powertrain control module
- Latest: donaldtfreeman
- May 6, 2025
6.0 Tech & FAQ
4r100 P0715/P0717 trouble codes.
- Latest: Tiha
- May 6, 2025
7.3 Tech & FAQ
I must be getting old… Exhaust is too loud
- Latest: ju015dd
- May 4, 2025
6.0 Aftermarket

Members online

No members online now.

Total: 504 (members: 2, guests: 502)

Top