Reply to thread

Message: [QUOTE="gnxtc2, post: 1228136, member: 1414"] There is a ridge on the hard line. I have it clamped before/after the ridge. You can see the ridge on the top return line by the end of the hose. Yes, it's the feed. You need to confirm the placement of the line. The feed is 3/8 and the return is 5/16.. I used the SD fuel pump. I found the matching connector for the fuel pump. The fuel heater wire controls the coil side of the relay, key on power. You then run a 20A line to the fuel pump off the relay. Billy T. [email]gnxtc2@aol.com[/email] [/QUOTE]

Verification

Random media

old_bitch_2

step_4

16Lariat2

0011

step_12

photo_7_4

step_2

after plasti dip spray

Latest posts

10R140 failure
- Latest: PSD-BLACK-CLOUD
- Friday at 1:04 PM
2017+ 6.7 Aluminum Super Duty
2010 headunit
- Latest: glog
- Wednesday at 1:17 PM
6.4 Tech
D
Turning off the Auxiliary powertrain control module
- Latest: donaldtfreeman
- Tuesday at 10:43 AM
6.0 Tech & FAQ
4r100 P0715/P0717 trouble codes.
- Latest: Tiha
- Tuesday at 8:07 AM
7.3 Tech & FAQ
I must be getting old… Exhaust is too loud
- Latest: ju015dd
- May 4, 2025
6.0 Aftermarket

Members online

No members online now.

Total: 295 (members: 0, guests: 295)

Top