Reply to thread

Message: [QUOTE="gigabit, post: 997389, member: 12732"] sorry for the lack of updates. busy life ;) so i test fired both HIDs semi-tight on the truck and the cut off looks great. the lines are very defined and there's a nice color flicker and step. [ATTACH=full]136146[/ATTACH] [ATTACH=full]136147[/ATTACH] there's some horizontal alignment issues with both steps being closer than actual car head light width, so you can either try to swivel it horizontally or shave off the inside a tad. vice versa if the width is too wide at 25." i think it's more of an issue if the beam is too narrow tbh. next, i needed to prep the shrouds and bowl for paint. either you can remove the chrome by sanding with multiple different grits or use a technique i found online... oven cleaner. it sprays on like apple sauce and you let it sit for 20 minutes. the chrome literally dissolves off the two surfaces. obviously the bowl is of higher quality and it'll require a second coat... easy peasy. [ATTACH=full]136148[/ATTACH] [ATTACH=full]136149[/ATTACH] [ATTACH=full]136150[/ATTACH] the touchest part so far are the shrouds for the upper pseudo projectors. the space is so darn narrow and requires a lot of shroud cutting, individually too. [/QUOTE]

Verification

Random media

Trucksetup

eleanor_part_two_21_

6.4 Single Turbo

1997 ZF5 DRW

IMG_5552_1_

2010-01-309517_07_37

P1000853

094

qu7a7a3y

95_Bronco_conversion_pics_014

'07 5.9 Cummins

Latest posts

10R140 failure
- Latest: Sterling6.7
- Yesterday at 8:54 PM
2017+ 6.7 Aluminum Super Duty
D
Turning off the Auxiliary powertrain control module
- Latest: donaldtfreeman
- Yesterday at 10:43 AM
6.0 Tech & FAQ
4r100 P0715/P0717 trouble codes.
- Latest: Tiha
- Yesterday at 8:07 AM
7.3 Tech & FAQ
I must be getting old… Exhaust is too loud
- Latest: ju015dd
- Sunday at 7:59 AM
6.0 Aftermarket
2000 f350 dually lariat
- Latest: Powerstroke Cowboy
- Saturday at 8:30 PM
7.3 Aftermarket

Members online

No members online now.

Total: 823 (members: 0, guests: 823)

Top