Reply to thread

Message: [QUOTE="kleake, post: 1470033, member: 25987"] That's what I have is a flange on both ends with a slip joint in the rear portion of the driveshaft. The flange had never been removed, but was found to be loose. (probably from the 235k miles that are on it). We tightened it and had vibes. I pulled it off, inspected everything and put it back on, likely in a slightly different position but no change. I might try marking the driveshaft as it rotates, then move the yoke 180 and see if it changes. That would tell me if it's the yoke or the shaft at least. [/QUOTE]

Verification

Random media

IMAG0697_1_

449D49D7-F1F3-4D00-959A-19155E78D0B0

0302110840a_1_

P1020153

Bronco tear down

535477_3644195951144_1891470662_n

2008 King Ranch motor work

652_1056686425023_5315_n

intake_test_fit

A_M1

2012-05-01_17-18-08_207

Latest posts

OEM LED sport headlights
- Latest: ghohouston
- Today at 10:26 PM
2017+ 6.7 Aluminum Super Duty
Gauge cluster face plates
- Latest: crash86
- Yesterday at 5:15 PM
6.0 Aftermarket
B
6.4 head gasket job cost
- Latest: bowhunter
- Yesterday at 2:07 PM
6.4 Aftermarket
S
6R140 surging issue
- Latest: Smokin 6.0
- Yesterday at 12:11 AM
6.7 Tech & FAQ
Won’t start
- Latest: psduser1
- Wednesday at 11:33 AM
7.3 Tech & FAQ

Members online

No members online now.

Total: 324 (members: 0, guests: 324)

Top