Reply to thread

Message: [QUOTE="JCart, post: 1535336, member: 1238"] Looking good 78-79.... finished up mine a few weeks ago and opted to feed through rear of heads using Diesel Innovations high pressure fittings, replacing the banjo bolts in the end of the heads. Had to stretch the firewall, used hydraulic duck bill to make room of 90 degree elbows by Russel Performance along with their Stainless (covered) high pressure hose, Y block and fittings. Also installed RiffRaff high pressure banjo bolts on the front of the block, used the stock returns from heads to Aeromotive regulator. As I’m still stock injectors running stock 7.3 e pump on frame with Donaldson P558000 water separator and Cat 1 R 750 spin on filters. Filters are same thread and size, common and great at filtering. Used stock fuel and return lines to block. Cheers, j [/QUOTE]

Verification

Random media

16349_685490491532570_5454867697180878287_n

harley3

Duramax hauling cattle

securedownload_1_4_

VVASSUP Juanito's F250 05 6.0 Harley Davidson TOYO RIZE RBP SCT MBRP S&

INJECTORS

SF2

1244070_485238398250087_907487000_o

Sandy Hook never forget

P6190003

Latest posts

10R140 failure
- Latest: PSD-BLACK-CLOUD
- Friday at 1:04 PM
2017+ 6.7 Aluminum Super Duty
2010 headunit
- Latest: glog
- Wednesday at 1:17 PM
6.4 Tech
D
Turning off the Auxiliary powertrain control module
- Latest: donaldtfreeman
- Tuesday at 10:43 AM
6.0 Tech & FAQ
4r100 P0715/P0717 trouble codes.
- Latest: Tiha
- Tuesday at 8:07 AM
7.3 Tech & FAQ
I must be getting old… Exhaust is too loud
- Latest: ju015dd
- May 4, 2025
6.0 Aftermarket

Members online

No members online now.

Total: 1,238 (members: 1, guests: 1,237)

Top