Reply to thread

Message: [QUOTE="lincolnlocker, post: 290244, member: 944"] are you saying your setup hits 1600* rite now hooked to the sled or at the strip with stage ones? if your worried about sled pulls with a stock turbo you could always use a beans sd66 instead of the 38r. it is still stock appearing.. and you can gate it enough for almost 600hp... granted the stage 2 wont get you there but it would be a great setup for stage twos and wont need to gate it... my setup runs really well... on beans dyno it did 492.6hp and on a couple others it did a 404(superflow) with badly leaking up pipes and on another dyno it did 408(dynojet 248c) with badly leaking up pipes and a boost leak... i would like to take it to the strip and see what it will run but haven't been near one... sled pulls it works great, never been above 1400* hooked to the sled or on the dyno... on the street its a different story, at 105mph (on the gps) it starts creeping past 1400* and by 115mph (on the gps) its creeping past 1700* or more. i only have a 1600* gauge... [/QUOTE]

Verification

Random media

eleanor_part_two_49_

befor an after

F350SRW2

VVASSUP Juanito's F250 05 6.0 Harley Davidson TOYO RIZE RBP SCT MBRP S&

2012 f250 sagging

photo_2_1

new_paint

Crandall

Latest posts

Truck slipping into 4th
- Latest: Sterling6.7
- Yesterday at 7:18 PM
6.7 Tech
Do not recommend Choate Engineering
- Latest: DEEZUZ
- Wednesday at 10:22 PM
Newly Enlisted
A few turbo questions and a rant
- Latest: ghohouston
- Wednesday at 9:41 PM
7.3 Aftermarket
O
2011-2016 Radiator upgrade
- Latest: OtisCreekConstruction
- Wednesday at 6:17 PM
6.7 Tech
Performance shops
- Latest: DEEZUZ
- Tuesday at 8:42 AM
7.3 Performance

Members online

Daves06

Total: 813 (members: 1, guests: 812)

Top