Reply to thread

Message: [QUOTE="Strictly Diesel, post: 1164148, member: 1411"] Sorry, just saw this. The adapter goes on the metal return line on the frame near the steering shaft. This allows the stock return line to be used from there back to the selector valve. Then, remove the selector valve and use the supplied 5/16" hose and clamps to connect the metal return tube near the selector valve to the return tube on top of the tank. I thought this was clear in the instructions, I will have to go check them again. Hope that helps! Fat fingered on my iPad...not responsible for typos! [/QUOTE]

Verification

Random media

phone_2017_628

08 door sill

1220121407_1_

amaple_grove_100

f3501

Amber Metallic Pstroke

IMG_20140929_165533

befor an after

sick leaker

pistons

Latest posts

I must be getting old… Exhaust is too loud
- Latest: ju015dd
- Today at 7:59 AM
6.0 Aftermarket
2000 f350 dually lariat
- Latest: Powerstroke Cowboy
- Yesterday at 8:30 PM
7.3 Aftermarket
T
B&W hitch and shock removal
- Latest: TexMac
- Wednesday at 2:48 PM
2017+ 6.7 Aluminum Super Duty
6
ISSUES WITH CHOATES WARRANTY
- Latest: 6.7powersmoke
- Wednesday at 2:12 PM
1999-2015 Superduty Series General
Truck slipping into 4th
- Latest: Sterling6.7
- Apr 25, 2025
6.7 Tech

Members online

No members online now.

Total: 711 (members: 0, guests: 711)

Top