Reply to thread

Message: [QUOTE="jmsmith76, post: 647210, member: 861"] Alright I fabbed up my pump/filter mounting bracket and sprayed it with rattle can bedliner. Here are a couple shots while the liner was drying... [ATTACH=full]107845[/ATTACH] [ATTACH=full]107846[/ATTACH] And here are a couple shots of everything mocked up... [ATTACH=full]107847[/ATTACH] [ATTACH=full]107848[/ATTACH] [ATTACH=full]107849[/ATTACH] [ATTACH=full]107850[/ATTACH] Anybody see any design flaws I'm overlooking? The gap between the pump clamps and the fuel/water separator is wider than it looks in that picture. It's a bad angle. I think I'll have room to get my hands in there for filter changing. As for servicing the pump whenever that happens, it'll just be 2 bolts and a couple hose clamps to pull the whole assembly off the frame rail so I'm not too worried about that. I mainly wanted to keep the pump tucked in there behind everything. [/QUOTE]

Verification

Random media

O&G's 2011 F250 Journey

Truck pics.

my first diesel and first truck, project white out

epic4

20121011_204928

Frosty 6.7

Dyno_for_Dex_8

20151030_160627

Custom Ricky's Dash Mounts/H&S/Edge/Dashdaq

Frosty 6.7

Latest posts

G
7.3L fuel pressure with black spring
- Latest: gooseman80
- Today at 1:41 PM
7.3 Tech
PCM replace/repair/compatibility
- Latest: KBMKVIII
- Yesterday at 2:33 PM
94-97 Aftermarket
G
97 Powerstroke PCM not capturing DTCs
- Latest: GRN250
- Monday at 9:13 PM
94-97 Tech
S
2018 f350 dually advance trac and hill descent unavailable ?
- Latest: Smokin 6.0
- Monday at 9:29 AM
6.7 Tech & FAQ
S
Wiring diagrams ?
- Latest: Smokin 6.0
- Sunday at 8:42 PM
6.7 Tech & FAQ

Members online

No members online now.

Total: 397 (members: 0, guests: 397)

Top