Reply to thread

Message: [QUOTE="BFT, post: 338108, member: 319"] IMO... You have to drain the coolant, then take off the degas bottle. -disconnect batteries 8mm -drain coolant. There is a stem that comes out off the side on the drain, put a 1/4 vacuum hose (or any hose) so the mess will be minimal. Only turn the drain about 1/2 to 1 full turn -8mm to remove the cables and hold down for driver side battery. -13mm to remove the tray (be careful when pulling the tray out since the vacuum line is attached) remove misc lines on the degas bottle and lower degas bottle hose. -there is one bolt connecting the steering linkage (13mm I think?) and separate it. This should give you LOTS of room to work with. It should take you about 6 hours or so to do if you are replacing the elbow and CAC pipe. [/QUOTE]

Verification

Random media

20121111_1801061

2012-01-07_14-43-48_912

road trip (pit stop)

My 6oh

57dr

October_2010_Aspen_Island_at_Hart_Prairie_Preserve_-_Rick_Braveheart

1511MG-100

Memorial_11_054

Screen_shot_2012-01-29_at_8_37_29_AM

Latest posts

10R140 failure
- Latest: PSD-BLACK-CLOUD
- Friday at 1:04 PM
2017+ 6.7 Aluminum Super Duty
2010 headunit
- Latest: glog
- Wednesday at 1:17 PM
6.4 Tech
D
Turning off the Auxiliary powertrain control module
- Latest: donaldtfreeman
- Tuesday at 10:43 AM
6.0 Tech & FAQ
4r100 P0715/P0717 trouble codes.
- Latest: Tiha
- Tuesday at 8:07 AM
7.3 Tech & FAQ
I must be getting old… Exhaust is too loud
- Latest: ju015dd
- May 4, 2025
6.0 Aftermarket

Members online

Total: 808 (members: 2, guests: 806)

Top