Reply to thread

Message: [QUOTE="DcMoore, post: 297459, member: 382"] I'm in the process of doing that to mine.. I have the actuator and motor if you need one.. To go to manual you have to take the actuator off and weld a piece of flat stock or equivilant to the part where the actuator goes and then connect that to the factory manual linkage.. What I'm going to do is drill a whole in my one inch flat stock and connect the linkage by using heims. The downfall is, is that the NV273 doesn't have a neutral position.. You can put it in neutral by just going in between 2 and 4H or 4H and 4L but don't have an actually neutral like the 271s. On edit... If you want your lights to work your going to have to cut your actuator in half and weld your flat stock to the gear, so that when you shift the sensor will pick it up. Either way you look at it, it's going to be "rigged" [/QUOTE]

Verification

Random media

20170122_124753

Tweeter extenstion

sick leaker

2006 F250 6.0 PSD LARIAT FX4

my obs 7.3

Stone grey compared to 01 super duty grey

2008 King Ranch motor work

99.5 7.3

1E357261-4DE3-46FF-B2F8-1C67C4B83303

6_4gate_004

Latest posts

I must be getting old… Exhaust is too loud
- Latest: Derkperk
- Yesterday at 2:18 PM
6.0 Aftermarket
T
B&W hitch and shock removal
- Latest: TexMac
- Wednesday at 2:48 PM
2017+ 6.7 Aluminum Super Duty
6
ISSUES WITH CHOATES WARRANTY
- Latest: 6.7powersmoke
- Wednesday at 2:12 PM
1999-2015 Superduty Series General
Truck slipping into 4th
- Latest: Sterling6.7
- Apr 25, 2025
6.7 Tech
Do not recommend Choate Engineering
- Latest: DEEZUZ
- Apr 23, 2025
Newly Enlisted

Members online

ghohouston

Total: 341 (members: 1, guests: 340)

Top