Reply to thread

Message: [QUOTE="ja_cain, post: 1274617, member: 11928"] You know I have been thinking about this kind of thing lately. What kind of phone do you have? I have been thinking about getting one of the add on thermal cameras for my phone so I can troubleshoot problems just like this. You should be able to scan the harness wires after running it for a minute or two. Needs to set overnight so it can cool completely as this will give you enough contrast/temp differential to pick up on a wire that is drawing too much current. Make sure you do it when the ambient temp is high enough not to call for the gp's (not sure what that is) or just ignore any wires associated with that circuit unless it is suspect. Electrical problems suck, that's why I bought an O-Scope and clamp meter at work. Just need to get some kind of thermal camera device and then I will be set. Good luck! [/QUOTE]

Verification

Random media

he351ve T4i turbine inlet

Standpipe & Dummy Plug Upgrade

63 Unibody F100

97psd5

6.0 nozzles

truck_and_camaro

2011-12-17_20-21-05_276

Workstock, when not hooked to sled its hooked to trailers

IMAG0321

Latest posts

Truck slipping into 4th
- Latest: Powerstroke Cowboy
- Today at 1:27 PM
6.7 Tech
Do not recommend Choate Engineering
- Latest: DEEZUZ
- Wednesday at 10:22 PM
Newly Enlisted
A few turbo questions and a rant
- Latest: ghohouston
- Wednesday at 9:41 PM
7.3 Aftermarket
O
2011-2016 Radiator upgrade
- Latest: OtisCreekConstruction
- Wednesday at 6:17 PM
6.7 Tech
Performance shops
- Latest: DEEZUZ
- Tuesday at 8:42 AM
7.3 Performance

Members online

Total: 387 (members: 3, guests: 384)

Top