Reply to thread

Message: [QUOTE="Brad.S.19, post: 1059367, member: 12605"] As for the electrical I spoke with a place that installs the style remote starter I have calling it "amateur at best" with advice saying leave the brake side alone that is correct but work on the rest where it is needed. Blower motor is works intermittent or when it wants to other than that it is fine. I am getting really pissed at the way it runs so my buddy and I did another cylinder contribution test, buzz test and idm codes came back clean as a whistle did it again p1298 idm failure still runs. Got it to temp took a very worn out 5 dollar bill blocked my ccv reroute would barely flutter/move the bill any decided to but it to 1500 rpm same thing, we could not connect to the pcm unless the the year was set @ 2002 and truck was running with the driver side neg term disconnected and the parking brake set with foot on the brake no wts used. Next his father looked at few things a couple phone calls later a 2002 based pcm, idm and engine codes/build date unknown miles on the block and heads a lot of conflicting issues that make it difficult to connect my vin is a early 2001 oct 24 2000. It is a forged rod. [/QUOTE]

Verification

Random media

20170502_2125231

clear cab lights, projection headlights, no more black paint

Screen_shot_2012-01-29_at_8_36_53_AM

diamond eye exhaust 5

more handy work

Hx40 comp map 7.3l data

IMG_4806_2_

2012-10-21_17-45-50_733

Adhesive for plastic

Screenshot1

2012-08-19_17-14-58_692

Latest posts

OEM LED sport headlights
- Latest: ghohouston
- 32 minutes ago
2017+ 6.7 Aluminum Super Duty
Gauge cluster face plates
- Latest: crash86
- Sunday at 5:15 PM
6.0 Aftermarket
B
6.4 head gasket job cost
- Latest: bowhunter
- Sunday at 2:07 PM
6.4 Aftermarket
S
6R140 surging issue
- Latest: Smokin 6.0
- Sunday at 12:11 AM
6.7 Tech & FAQ
Won’t start
- Latest: psduser1
- Wednesday at 11:33 AM
7.3 Tech & FAQ

Members online

Total: 271 (members: 2, guests: 269)

Top