Reply to thread

Message: [QUOTE="dtrojcak, post: 1152069, member: 614"] Update: I removed the driver's side valve cover, checked all connections, disconnected and reconnected the 9 pin connector. I then put the valve cover back on with just a couple of screws and tried to start engine. Engine fired right up like normal and ran smooth. I then ran various tests with the AE scanner and the P1294 code will intermittently reappear. I ran the injector buzz test several times, about half will run successful with no codes and the other half will throw the P1294 code. I debating whether or not to put everything back together since the truck now starts and runs or just replacing the driver's side harness while everything is still somewhat taken apart. If I can find the harness in stock at my local International parts house or my local Ford dealer, I'll replace it. Is there any other thing(s) I should be looking for at this point? [/QUOTE]

Verification

Random media

girdle

Wheels for sale

'07 5.9 Cummins

The Rig

tranny_swap

RSK

SHAQ

with canopy on

bigger_97_f250

2012-10-31_18-15-34_882

Latest posts

T
B&W hitch and shock removal
- Latest: TexMac
- Wednesday at 2:48 PM
2017+ 6.7 Aluminum Super Duty
6
ISSUES WITH CHOATES WARRANTY
- Latest: 6.7powersmoke
- Wednesday at 2:12 PM
1999-2015 Superduty Series General
Truck slipping into 4th
- Latest: Sterling6.7
- Apr 25, 2025
6.7 Tech
Do not recommend Choate Engineering
- Latest: DEEZUZ
- Apr 23, 2025
Newly Enlisted
A few turbo questions and a rant
- Latest: ghohouston
- Apr 23, 2025
7.3 Aftermarket

Members online

No members online now.

Total: 676 (members: 1, guests: 675)

Top