Reply to thread

Message: [QUOTE="Big Green Monster, post: 1241479, member: 2516"] Just had a friend of mine from out of state call me about problems with his truck after he did head gaskets and studs on the engine. (2005 6.0 Auto 2wd) The heads were removed with the cab on and everything put back together after sending them out for some machine work He is saying that after getting it all back together when he goes to turn it over he will hear the normal click of the glow plugs, but the engine wont turn over with the key. Jumping it at the starter will allow the engine to turn, the dash lights up like it should except the radio is not working. (He cant confirm if this was already an issue before he began the work) And after looking over everything several times he still does not see anything that he forgot to plug back in. I've done gaskets and studs a few times, but never ran into this issue before so I haven't been much help for him. By any chance have any of you encountered the problem before? Maybe if we brainstorm the issue I can send a bunch of ideas his way and hopefully one of them works for him...? [/QUOTE]

Verification

Random media

Old Pics of Betty

DSCF3418

MG_6989

farm-charter_024

IMAG0901

Blackstone_1-27-17

AD1_2_

3E93If3N15L35N25F6d2ia9d9198b3f401a14

20180808_160558

Latest posts

10R140 failure
- Latest: PSD-BLACK-CLOUD
- Friday at 1:04 PM
2017+ 6.7 Aluminum Super Duty
2010 headunit
- Latest: glog
- Wednesday at 1:17 PM
6.4 Tech
D
Turning off the Auxiliary powertrain control module
- Latest: donaldtfreeman
- Tuesday at 10:43 AM
6.0 Tech & FAQ
4r100 P0715/P0717 trouble codes.
- Latest: Tiha
- Tuesday at 8:07 AM
7.3 Tech & FAQ
I must be getting old… Exhaust is too loud
- Latest: ju015dd
- May 4, 2025
6.0 Aftermarket

Members online

No members online now.

Total: 840 (members: 0, guests: 840)

Top