Reply to thread

Message: [QUOTE="TARM, post: 370486, member: 578"] Think hpop system first then injector wiring next followed by injectors themselves ICP sensor IPR dirty,bad oring, loose nut UVC wiring or wiring between it and IDM Injector orings or worn injectors One thing I have learned about IPR DC% at idle is depending on the hpop and injectors, oil used, or tunes it can vary from 6% up to 14% and still have nothing wrong. Take my sp1 I was concerned when people stated my 12% DC was to high. Then in checking with another member that had the same injectors same builder as well as had my actual pump and then had now a full stealth stage II look thru his records and with both his pumps he ran the exact same duty cycle as I. Tell me that something in the combo was the reason yet when max icp 3100 was called for and maintained DC never went over 43-45% so no pump isue making volume when needed or pressure for that matter. [/QUOTE]

Verification

Random media

RACK_4_

My OBS E-Fuel system

Morimoto D2S 5.0 Projectors

photo_44

Both together

1997 Dually

Bella as puppy

jeep_front1

2011-04-12_17-33-36_868

Studio 17

just finished my grill

Latest posts

Won’t start issues
- Latest: psduser1
- Sunday at 8:30 PM
7.3 Tech & FAQ
Windshield washer fluid reservoir
- Latest: psduser1
- Sunday at 8:27 PM
7.3 Tech & FAQ
F-250 & F-350 gear ratio question ?
- Latest: Mark Kovalsky
- Sunday at 6:57 PM
6.7 Tech & FAQ
Y
2001 Ford F350 7.3 l powerstroke diesel windshield washer fluid reservoir
- Latest: Yojih123
- Sunday at 12:15 PM
7.3 Tech & FAQ
s364.5
- Latest: htsummers22
- Saturday at 10:54 PM
Want to Buy

Members online

6.7Bison

Total: 396 (members: 1, guests: 395)

Top